Independent Trading Co.

• 82 Gm, 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining 
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

This product meets the following Sustainable Style subcategory:   Socially Conscious Manufacturing: This product is made in a facility that is WRAP certified. Please Note: Low temperature curing poly ink & poly blocker recommended. Keep garment temperature under 300° to avoid dye migration to your print.

• 2.5 oz./yd² (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

Please Note: Low temperature curing poly ink & poly blocker recommended. Keep garment temperature under 300° to avoid dye migration to your print. 

• 8.5 oz./yd² (US) 14.1 oz./L yd (CA), 80/20 ring-spun cotton/polyester blend fleece with 100% cotton face, 20 singles
• Grey Heather is 75/25 cotton/polyester
• Heather colors are 55/45 cotton/polyester (Charcoal Heather, Royal Heather)
• Classic fit
• Split stitch double-needle sewing on all seams
• Jersey lined hood
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• No drawcord
• Tear away label

At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees. 300 degrees or lower is a safer temperature to avoid ink migration problems.

• 7.5 oz./yd² (US) 12.5 oz./L yd (CA) 55/45 ring-spun cotton/polyester fabric, 20 singles
• Unisex, slim fit
• Loopback terry fabric
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• Tear away label

Please note: This style is not made of 100% cotton face yarn. Please do your own testing prior to screen printing. This is not a discharge friendly fabric. 

• 6.5 oz./yd² (US), 11 oz./L yd (CA), 80/20 ring-spun cotton/polyester with 100% cotton anti-pill face, 40 singles
• Charcoal Heather is 55/45 cotton/polyester
• Gunmetal Heather is 65/35 cotton/polyester
• Pre-laundered 
• Unisex, Slim fit
• Double-needle split stitched throughout
• Unlined hood with nickel eyelets
• Plastic tipped white round drawcord
• Twill neck tape
• 1x1 ribbing at cuffs, waistband, & pocket openings
• Pouch pocket
• Tear away label

Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.   When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying.   Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees. 300 degrees or lower is a safer temperature to avoid ink migration problems.

• 7 oz./yd² (US), 11.7 oz (CA), 55/45 ring-spun cotton/polyester blend fleece
• Slim fit
• Raglan sleeves
• Jersey lined hood with nickel eyelets
• Split stitch double-needle sewing
• Twill neck tape
• 1x1 ribbing at cuffs and waistband
• Pouch pocket
• Tear away label

Please note: This style is not made of 100% cotton face yarn. Please do your own testing prior to screen-printing. This is not a discharge friendly fabric

• 6.5 oz./yd² (US), 11 oz./L yd (CA), 80/20 ring-spun cotton/polyester blend fleece with 100% cotton face, 40 singles
• Charcoal Heather is 55/45 cotton/polyester
• Gunmetal Heather is 65/35 cotton/polyester
• Pre-laundered 
• Unisex, slim fit
• Double-needle split stitched throughout
• Unlined hood with nickel eyelets
• Plastic tipped white round drawcord
• Twill neck tape
• White coil kissing zipper with nickel pull
• 1x1 ribbing at cuffs, waistband & pocket openings
• Split-pouch pockets
• Tear away label

Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.

• 7 oz./yd² (US) 11.7 oz./L yd (CA), 52/48 ring-spun cotton/polyester blend 3-end fleece
• Wave wash garment-washed for softness and unique color
• Classic fit
• Raglan sleeves
• Blindstitch & coverstitch
• Sewn eyelets
• Twill neck tape
• Woven label

• 10 oz./yd² (US) 16.7 oz./L yd (CA), 70/30 ring-spun cotton/polyester blend 3-end fleece with 100% cotton face, 32 singles
• Black, Classic Navy, & Gunmetal Heather are 80/20 cotton/polyester
• Camo colors (Forest Camo, Black Camo, Tiger Camo, Army Camo, Snow Camo & Duck Camo) are 75/25 cotton/polyester
• Houndstooth is 70/30 cotton/polyester
• Heather colors (Charcoal Heather & Grey Heather) are 52/48 cotton/polyester
• Safety colors are 52/48 cotton/polyester with 65/35 polyester/cotton face yarn
• Generous fit
• Fleece lined hood
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 ribbing at cuffs and waistband
• Nickel eyelets
• Tear away label 

• 8.5 oz./yd² (US) 14.2 oz./L yd (CA) 80/20 ring-spun cotton/polyester blend fleece with 100% cotton face
• Grey Heather is 52/48 cotton/polyester
• Elastic waistband with shoestring drawcord
• Relaxed fit
• 1x1 ribbing at ankle cuffs
• Sewn eyelets
• Sewn fly detail
• Back pocket & jersey lined hand pockets
• Tear away label